SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA20113 MAZDASPEED, 2.3 3REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 652 (SECURITY SYSTEM AND LOCKS SYSTEM)CUSTOMIZED FUNCTION SETTING PROCEDURE [WITH ADVANCED KEYLESS SYSTEM]
2011 Mazda 3 Mazdaspeed, 2.3 3

Customized Function Setting Procedure [With Advanced Keyless System]

2011 Mazda 3 Mazdaspeed, 2.3 3SECTION Customized Function Setting Procedure [With Advanced Keyless System]
WARNING: This page is about a different car, the 2011 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS to DLC-2.
  2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select "Module Programming".
    • When using the PDS (Pocket PC)
      1. Select "Programming".
      2. Select "Module Programming".
  3. Then, select items from the screen menu in the following order.
    1. Select "Programmable Parameters".
    2. Select "RKE".
  4. Select an item name, and then select option. Items
    • "Answer Back Buzzer"
    • "Automatic Locks"
    • "Card Key Battery Low Warning"
    Fig 1: Identifying DLC-2 Connector
    G05986044Courtesy of MAZDA MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.