Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2010 Mazda CX-9 Sport, 3.7 V, AWD
Quick Lookups: Fluids
2010 Mazda CX-9 Sport, 3.7 V, AWDSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 5.40 OZS. | 0.15 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.45 LBS. | 0.65 KG | R-134a | S | |||
| Automatic Transmission Fluid | 7.40 QTS. | 7 L | MAZDA Genuine JWS3309 | S | |||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | Fill to line on reservoir. | S | ||
| Differential Gear Oil | Rear | 1.10 QTS. | 1.04 L | API - GL- 5, SAE 80W-90 | S | ||
| Engine Coolant | w/o Towing Package | 13.60 QTS. | 12.87 L | FL22 Type Engine Coolant | S | ||
| Engine Coolant | w/Towing Package | 14.10 QTS. | 13.34 L | FL22 Type Engine Coolant | S | ||
| Engine Oil | w/Filter | 5.50 QTS. | 5.2 L | API - SM or ILSAC, SAE 5W-20 Engine Oil | S | ||
| Engine Oil | w/o Filter | 5.00 QTS. | 4.73 L | API - SM or ILSAC, SAE 5W-20 Engine Oil | S | ||
| Fuel Tank | 20.10 GALS. | 76.08 L | S | ||||
| Transfer Case Fluid | 0.56 QTS. | 0.52 L | API - GL-5, SAE 75W-140 | S | |||
| Windshield Washer Fluid | N/A | N/A | Ultra-Clear Windshield Washer Fluid | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.