Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2010CX-9 SPORT, 3.7 V, AWDREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLDYNAMIC STABILITY CONTROL SYSTEM/ROLL STABILITY CONTROL SYSTEMFRONT ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION
2010 Mazda CX-9 Sport, 3.7 V, AWD
Front Abs Wheel-Speed Sensor Removal/Installation
2010 Mazda CX-9 Sport, 3.7 V, AWDSECTION Front Abs Wheel-Speed Sensor Removal/Installation
- When removing the right front ABS wheel-speed sensor, perform the following procedure.
- Remove the coolant reserve tank installation bolts and move the coolant reserve tank. (See COOLANT RESERVE TANK REMOVAL/INSTALLATION [MZI-3.7] .)
- Remove the power steering reserve tank installation bolt and nut, and move the power steering reserve tank. (See POWER STEERING OIL PUMP REMOVAL/INSTALLATION .)
- When removing the left front ABS wheel-speed sensor, perform the following procedure:
- Remove the air cleaner case. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZI-3.7] .)
- Remove in the order indicated in the table.
- Install in the reverse order of removal.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.