SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA20105 SPORT, 2.3 L, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 597 (GLASS/WINDOWS/MIRRORS)POWER OUTER MIRROR INSPECTION
2010 Mazda 5 Sport, 2.3 L, Standard

Power Outer Mirror Inspection

2010 Mazda 5 Sport, 2.3 L, StandardSECTION Power Outer Mirror Inspection
WARNING: This page is about a different car, the 2008 Mazda 5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply battery positive voltage to the power outer mirror terminals and inspect the operation of the power outer mirror.
    • If not as specified, replace the power outer mirror.
    CONNECTOR TERMINAL REFERENCE

    Mirror operation terminal
    B+ GND
    Up A B
    Down B A
    Left C B
    Right B C
    Fig 1: Power Outer Mirror - Circuit Diagram
    G05545727Courtesy of MAZDA MOTORS CORP.
  2. Inspect for continuity between the power outer mirror heater terminals.
    • If not as specified, replace the power outer mirror.
      Fig 2: Power Outer Mirror Continuity Chart
      G05545728Courtesy of MAZDA MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.