Outer Mirror Glass Installation

2010 Mazda 5 Sport, 2.3 L, StandardSECTION Outer Mirror Glass Installation
WARNING: This page is about a different car, the 2008 Mazda 5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the connector, (vehicles with heated outer mirrors)
  2. Press part A on the outer mirror glass and install pin A
  3. Press part B on the outer mirror glass and install pins 6.
    Fig 1: Identifying Outer Mirror Glass And Mirror Glass Holder
    G05545720Courtesy of MAZDA MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.