Speaker inspection

2010 Mazda 5 Sport, 2.3 L, StandardSECTION Speaker inspection
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. With audio on, first press the POWER button and hold it, then press the AUTO-M button for approximately 1 second.Β 
  2. Inspect the speaker according to the following table:
    SPEAKER INSPECTION

    Inspection Display Action
    • Start speaker inspection mode.
    • Does each speaker output sound in the following order?
      1. Left front door speaker and tweeter
      2. Right front door speaker and tweeter
    - Yes Speakers and wiring harness between base unit and speakers are okay.
    No Inspect the following parts.
    • Malfunctioning speaker
    • Wiring harness between base unit and malfunctioning speaker
  3. Turn the audio off or the ignition switch to the LOCK position to stop the diagnostic assist function.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.