SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA20105 SPORT, 2.3 L, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 491 (SYMPTOM TROUBLESHOOTING [ENGINE CONTROL SYSTEM BP, BP WITH TC))NO.29 FUEL FILLING SHUT OFF ISSUESNOTES
2010 Mazda 5 Sport, 2.3 L, Standard

No.29 Fuel Filling Shut Off Issues: Notes

2010 Mazda 5 Sport, 2.3 L, StandardSECTION Notes
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
NO.29 FUEL FILLING SHUT OFF ISSUES [BP, BP WITH TC] DESCRIPTION & POSSIBLE CAUSE

29 Fuel filling shut off issues
DESCRIPTION 
  • Fuel does not shut off properly.
POSSIBLE CAUSE 
  • Clogged EVAP pipes
  • Nonreturn valve malfunction
  • Fuel shut off valve malfunction
  • Fuel nozzle malfunction
  • Fuel nozzle is not inserted correctly.
    WARNING:
    • The following troubleshooting flow chart contains the fuel system diagnosis and repair procedures. Read the following warnings before performing the fuel system services:
      • Fuel vapor is hazardous. It can easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel.
      • Fuel line spills and leakage are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin and eyes. To prevent this, always complete "BEFORE SERVICE PRECAUTION" and "AFTER SERVICE PRECAUTION".

        (See BEFORE SERVICE PRECAUTION )

        (See AFTER SERVICE PRECAUTION )

    RENDER: 1.0x

    NO RELATED

    Recommended Tools & Savings

    Use the Manual With the Right Hardware

    Pair factory procedures with proven DIY tools so the instructions are easier to execute.

    Affiliate disclosure: We may earn a commission at no extra cost to you.

    Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

    When to See a Mechanic

    Stop DIY work and contact a certified mechanic immediately if any of the following apply:

    • • You smell fuel, burning insulation, or see smoke.
    • • Brakes feel soft, pull hard to one side, or make grinding noises.
    • • The engine overheats, stalls repeatedly, or misfires under load.
    • • You are missing required tools, torque specs, or safe lifting equipment.
    • • You are not confident in the next step or safety outcome.