SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA20105 SPORT, 2.3 L, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 380 (SEATS)RECLINER MOTOR INSPECTION
2010 Mazda 5 Sport, 2.3 L, Standard

Recliner Motor Inspection

2010 Mazda 5 Sport, 2.3 L, StandardSECTION Recliner Motor Inspection
WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the recliner motor connector.
  2. Apply battery positive voltage to the recliner motor terminals and inspect the recliner motor operation.
    • If not as specified, replace the recliner motor.
      Fig 1: Recliner Motor Circuit Diagram And Connector Terminals
      G03645371Courtesy of MAZDA MOTORS CORP.
      MOTOR OPERATION CHART

      Motor operation Connection
      B+ GND
      Forward A B
      Backward B A
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.