No. 3 Will Not Crank: Notes

2010 Mazda 5 Sport, 2.3 L, StandardSECTION Notes
WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
DESCRIPTION & POSSIBLE CAUSE

3 WILL NOT CRANK
DESCRIPTION  Starter does not work.
POSSIBLE CAUSE 
  • Open starter circuit between ignition switch and starter
  • TR switch malfunction (ATX)
  • TR switch misadjustment (ATX)
  • Low or dead battery.
  • Charging system malfunction.
  • Starter interlock switch malfunction (MTX).
  • Starter malfunction
  • Seized/hydrolocked engine, flywheel or drive plate
  • Immobilizer system (PATS) and/or circuit malfunction.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.