SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA20105 SPORT, 2.3 L, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 204 (ENTERTAINMENT SYSTEM)CIGARETTE LIGHTER REMOVAL/INSTALLATIONSOCKET REMOVAL NOTE
2010 Mazda 5 Sport, 2.3 L, Standard

Socket Removal Note

2010 Mazda 5 Sport, 2.3 L, StandardSECTION Socket Removal Note
WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the socket while pushing the protrusion of the ring through the hole of the socket with a tape-wrapped flathead screwdriver.
    Fig 1: Turning Socket While Pushing Protrusion Of Ring Through Hole Of Socket
    G02563909Courtesy of MAZDA MOTORS CORP.
  2. Push the socket forward.
  3. Return the socket clockwise to original angle position as shown to pull it forward.
    Fig 2: Locating Socket Holes
    G02563910Courtesy of MAZDA MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.