Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA20105 SPORT, 2.3 L, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 123 (AIR BAG SYSTEM)COMPONENT LOCATIONS
2010 Mazda 5 Sport, 2.3 L, Standard
Component Locations
2010 Mazda 5 Sport, 2.3 L, StandardSECTION Component Locations
WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
Refer to illustration for component locations. See Fig 1 .
RESTRAINT SYSTEM COMPONENT LOCATIONS
| Component | Location |
|---|---|
| Clockspring | On steering column, behind steering wheel |
| Dual-stage driver-side air bag module | Center of steering wheel |
| Dual-stage passenger-side air bag module | Right side of instrument panel, above glove box |
| Front crash sensor | Next to hood latch, behind radiator grille |
| SAS control module | On tunnel, under center of instrument panel |
| Seat belt buckle switches | Integrated with front seat belt buckles |
| Seat belt pretensioners | Integrated with front seat belt retractors |
| Seat track position sensor | On left front seat track frame |
| Side air bag modules | Outboard bolster of both front seat backs |
| Side curtain air bag modules | Behind right & left sides of headliner, between A-pillar & C-pillar |
| Side crash sensors | In right & left B-pillars |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.