SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA20105 SPORT, 2.3 L, STANDARDREPAIR AND DIAGNOSISENGINE PERFORMANCETESTING & DIAGNOSISSYMPTOM TROUBLESHOOTING [L3] - ENGINENO. 22 VIBRATION CONCERNS (ENGINE)DIAGNOSTIC PROCEDURE
2010 Mazda 5 Sport, 2.3 L, Standard

Diagnostic procedure

2010 Mazda 5 Sport, 2.3 L, StandardSECTION Diagnostic procedure
DIAGNOSTIC PROCEDURE CHART

STEP INSPECTION RESULTS ACTION
1 Inspect the following components for loose attaching bolts or worn parts:
  • Cooling fan
  • Drive belt and pulleys
  • Generator
  • Engine mounts
  • Exhaust system mounts

All items normal?		 Yes Inspect the following systems:
  • Wheels
  • ATX
  • Driveline
  • Suspension
No Readjust or retighten engine mount installation position.
Service if necessary for other parts.
2
  • Verify test results.
    • If normal, return to diagnostic index to service any additional symptoms.

      (See SYMPTOM DIAGNOSTIC INDEX .)

    • If malfunction remains, inspect related Service Bulletins and/or On-line Repair Information and perform repair or diagnosis.
      • If vehicle is repaired, troubleshooting completed.
      • If vehicle is not repaired or additional diagnostic information is not available, replace the PCM.

        (See PCM REMOVAL/INSTALLATION .)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.