SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA20105 SPORT, 2.3 L, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTENTERTAINMENT SYSTEMSON-BOARD DIAGNOSTIC [AUDIO]SUPPLIER IDENTIFICATION PROCEDURE [AUDIO]VERIFY USING THE DIAGNOSTIC ASSIST FUNCTION
2010 Mazda 5 Sport, 2.3 L, Standard

Verify Using the Diagnostic Assist Function

2010 Mazda 5 Sport, 2.3 L, StandardSECTION Verify Using the Diagnostic Assist Function
  1. Turn the ignition switch to the AEE or ON position.
  2. Turn the audio unit power to on.
  3. While pressing the POWER/VOLUME button, simultaneously press the Preset button "5" for 3 s or more. 
    Fig 1: Identifying Preset Button
    G06762062Courtesy of MAZDA MOTORS CORP.
  4. Identify the supplier code by referring to the information display.
    SUPPLIER CODE REFERENCE

    Supplier code Supplier name
    01 SANYO Automedia
    02 Panasonic
    03 Clarion
    04 Pioneer
    Fig 2: Screen Display - Supplier Code
    G05545520Courtesy of MAZDA MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.