Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2009TRIBUTE 4WD L4-2.5LREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSTESTING AND INSPECTIONPINPOINT TESTSENGINE PERFORMANCETEST 3: INTERMITTENT
2009 Mazda Tribute 4WD L4-2.5L
Test 3: Intermittent
2009 Mazda Tribute 4WD L4-2.5LSECTION Test 3: Intermittent
TEST 3: INTERMITTENT
WARNING:When carrying out any of the test steps, always be aware of hands, clothing or tools near cooling fans or hot surfaces.
NOTE:PIDs selected from the PID/DATA MONITOR table will display commanded values only. Digital multimeter measurements will display actual values.
Step 1-Step 4:
Step 5-Step 7:
Step 8-Step 10:
Step 11-Step 14:
Step 15:
Step 16-Step 17:
Step 18-Step 19:
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.