Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2009TRIBUTE 4WD L4-2.5LREPAIR AND DIAGNOSISBRAKES AND TRACTION CONTROLPARKING BRAKE SYSTEMDESCRIPTION AND OPERATIONPARKING BRAKE
2009 Mazda Tribute 4WD L4-2.5L
Parking Brake
2009 Mazda Tribute 4WD L4-2.5LSECTION Parking Brake
PARKING BRAKE
Principles of Operation
When the parking brake control is pressed, tension is applied to the front parking brake cable. This tension pulls on the RR parking brake cable, which is attached to the RR brake shoe actuator and applies the RR brake shoes. At the same time, the tension in the front cable causes the front cable conduit to attempt to straighten out. This straightening effect causes the front cable conduit to pull on the LR parking brake cable, which is attached to the LR brake shoe actuator and applies the LR brake shoes.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.