Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2009B4000 V6-4.0LREPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINDIFFERENTIAL ASSEMBLYSERVICE AND REPAIRPROCEDURES
2009 Mazda B4000 V6-4.0L
Procedures
2009 Mazda B4000 V6-4.0LSECTION Procedures
-
AXLE/DIFFERENTIAL DRAIN AND REFILL - FRONT
1. With the vehicle in NEUTRAL, position it on a hoist.See Lifting.
2. Remove the differential fill plug.
3. Remove the axle lubricant through the fill opening.
4. If necessary, a cleaning solvent can be injected to remove any contaminants.
5. Remove the cleaning solvent through the fill opening.
6. Refill the differential with axle lubricant meeting API Service GL-5 specification.
7. Install the fill plug and tighten.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.