Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2009B4000 V6-4.0LREPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINAUTOMATIC TRANSMISSION/TRANSAXLESHIFT INTERLOCKSERVICE AND REPAIR
2009 Mazda B4000 V6-4.0L
Shift Interlock: Service and Repair
2009 Mazda B4000 V6-4.0LSECTION Service and Repair
BRAKE SHIFT INTERLOCK OVERRIDE
NOTE:This vehicle is equipped with a brake shift interlock feature that prevents the gearshift lever from being moved out of PARK when the ignition is in the ON position unless the brake pedal is depressed.
NOTE:Use the override procedure to move the gearshift lever out of the PARK position, it is possible that has blown and the brake lights are not operational. Before driving the vehicle, verify that the brake lights are working.If the gearshift lever cannot be moved out of the PARK position when the ignition is in the ON position and the brake pedal is depressed, carry out the following steps:
1. Apply the parking brake.
2. Insert the ignition key and turn it to OFF.
3. Apply the brake pedal and move the selector lever into NEUTRAL.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.