Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2008TRIBUTE S SPORT, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 809 (GENERAL PROCEDURES (ENGINE/EXHAUST NEUTRALIZING PROCEDURE))POWERTRAIN/DRIVETRAIN MOUNT NEUTRALIZING
2008 Mazda Tribute s Sport, 4WD
Powertrain/Drivetrain Mount Neutralizing
2008 Mazda Tribute s Sport, 4WDSECTION Powertrain/Drivetrain Mount Neutralizing
WARNING: This page is about a different car, the 2006 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
- With the vehicle in NEUTRAL, position it on a hoist. See LIFTING .
- Loosen, but do not remove, the powertrain/drive-train mount fasteners.
- Lower the vehicle.CAUTION:
- Do not twist or strain the powertrain/drivetrain mounts.
- Move the vehicle in forward and reverse 0.6-1.2 meters (2-4 ft).
- With the vehicle in NEUTRAL, position it on a hoist. See LIFTING .
- Tighten the powertrain/drivetrain mount fasteners.
- Lower the vehicle.
- Test the system for normal operation.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.