Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Anti-Lock Brake System (ABS) Module Diagnostic Trouble Code (DTC) Index
2008 Mazda Tribute s Sport, 4WDSECTION Anti-Lock Brake System (ABS) Module Diagnostic Trouble Code (DTC) Index
WARNING: This page is about a different car, the 2006 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC TROUBLE CODE
| DTC | Description | Source | Action |
|---|---|---|---|
| B1342 | ECU Is Faulted | ABS Module |
NOTE:
CLEAR the DTCs. RETRIEVE the DTCs. If DTC B1342 is retrieved, INSTALL a new module. See
ANTI-LOCK BRAKE SYSTEM (ABS) MODULE
. REPEAT the self-test.
|
| B1676 | Battery Pack Voltage Out of Range | ABS Module | See PINPOINT TEST 2: DTC B1676 - BATTERY PACK VOLTAGE OUT OF RANGE . |
| B2477 | Module Configuration Failure | ABS Module | Follow the WDS or equivalent Tester directions for the calibration procedure. |
| B2900 | VIN Mismatched | ABS Module | VERIFY that the module has the correct as-built data. |
| C1095 | ABS Hydraulic Pump Motor Circuit Failure | ABS Module | See PINPOINT TEST 5: DTC C1095 - HYDRAULIC PUMP MOTOR CIRCUIT FAILURE . |
| C1145 | Wheel Speed Sensor RF Input Circuit Failure | ABS Module | See PINPOINT TEST 3: DTC C1145, DTC C1155, DTC C1165 AND DTC C1175 - WHEEL SPEED SENSOR INPUT CIRCUIT FAILURE . |
| C1155 | Wheel Speed Sensor LF Input Circuit Failure | ABS Module | See PINPOINT TEST 3: DTC C1145, DTC C1155, DTC C1165 AND DTC C1175 - WHEEL SPEED SENSOR INPUT CIRCUIT FAILURE . |
| C1165 | Wheel Speed Sensor RR Input Circuit Failure | ABS Module | See PINPOINT TEST 3: DTC C1145, DTC C1155, DTC C1165 AND DTC C1175 - WHEEL SPEED SENSOR INPUT CIRCUIT FAILURE . |
| C1175 | Wheel Speed Sensor LR Input Circuit Failure | ABS Module | See PINPOINT TEST 3: DTC C1145, DTC C1155, DTC C1165 AND DTC C1175 - WHEEL SPEED SENSOR INPUT CIRCUIT FAILURE . |
| C1233 | Wheel Speed LF Input Signal Missing | ABS Module | See PINPOINT TEST 4: DTC C1233, DTC C1234, DTC C1235 AND DTC C1236 - WHEEL SPEED SENSOR INPUT SIGNAL MISSING . |
| C1234 | Wheel Speed RF Input Signal Missing | ABS Module | See PINPOINT TEST 4: DTC C1233, DTC C1234, DTC C1235 AND DTC C1236 - WHEEL SPEED SENSOR INPUT SIGNAL MISSING . |
| C1235 | Wheel Speed RR Input Signal Missing | ABS Module | See PINPOINT TEST 4: DTC C1233, DTC C1234, DTC C1235 AND DTC C1236 - WHEEL SPEED SENSOR INPUT SIGNAL MISSING . |
| C1236 | Wheel Speed LR Input Signal Missing | ABS Module | See PINPOINT TEST 4: DTC C1233, DTC C1234, DTC C1235 AND DTC C1236 - WHEEL SPEED SENSOR INPUT SIGNAL MISSING . |
| U1900 | CAN Communication Bus Fault-Receive Error | Network Fault | See COMMUNICATIONS NETWORK . |
| U2023 | Fault Received From External Node | Network Fault | See COMMUNICATIONS NETWORK . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.