Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2008TRIBUTE S SPORT, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 737 (AUXILIARY CLIMATE CONTROL)SPECIFICATIONSTORQUE SPECIFICATIONS
2008 Mazda Tribute s Sport, 4WD
Torque Specifications
2008 Mazda Tribute s Sport, 4WDSECTION Torque Specifications
WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| A/C (peanut) fitting nut | 8 | - | 71 |
| Floorpan bracket nuts | 3 | - | 27 |
| Auxiliary climate control housing bolts | 6 | - | 53 |
| LH rear brake caliper bolts | 35 | 26 | - |
| Park brake cable bolts | 12 | 9 | - |
| Rear subframe bracket bolts | 63 | 46 | - |
| Trailing arm-to-knuckle bolt | 110 | 81 | - |
| Trailing arm-to-subframe bolt | 110 | 81 | - |
| LH lower shock bolt-AWD | 142 | 105 | - |
| LH lower shock bolt-FWD | 110 | 81 | - |
| Rear subframe bolts | 115 | 85 | - |
| LH rear fuel tank strap bolt | 35 | 26 | - |
| Auxiliary line bracket bolts | 5 | - | 44 |
| Auxiliary line bracket nuts | 5 | - | 44 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.