Door Glass And Guide Removal/Installation

2008 Mazda Tribute s Sport, 4WDSECTION Door Glass And Guide Removal/Installation
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lower or raise the front door glass so that the distance from the top of the front door glass at the molding is 225 mm {8.86 in}Β  .
  2. Disconnect the negative battery cable.
  3. Remove the door screen. (See DOOR DISASSEMBLY/ASSEMBLY .)
  4. Remove in the order indicated in the table.
    Fig 1: Removing Door Glass And Guide
    G03638701Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
  6. Adjust the door glass. (See DOOR GLASS ADJUSTMENTΒ .)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.