SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2008TRIBUTE S SPORT, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 344 (SYMPTOM TROUBLESHOOTING (ENGINE CONTROL SYSTEM AJ))NO. 14 POOR FUEL ECONOMYNOTES
2008 Mazda Tribute s Sport, 4WD

No. 14 Poor Fuel Economy: Notes

2008 Mazda Tribute s Sport, 4WDSECTION Notes
WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
DESCRIPTION & POSSIBLE CAUSE

14 Poor fuel economy
DESCRIPTION 
  • Fuel economy is unsatisfactory.
POSSIBLE CAUSE 
  • Contaminated air cleaner element
  • Engine cooling system malfunction
  • Improper ATF level (ATX)
  • Weak spark
  • Poor fuel quality
  • Erratic or no signal from CMP sensor
  • Clutch slippage (MTX)
  • Improper operation of variable valve timing control system
  • Improper coolant level
  • Inadequate fuel pressure
  • Spark plug malfunction
  • PCV valve malfunction
  • Brake dragging
  • Improper valve timing due to jumping out of timing belt
  • Contaminated MAF sensor
  • Improper engine compression
  • Exhaust system clogging
WARNING:
  • The following troubleshooting flow chart contains the fuel system diagnosis and repair procedures. Read the following warnings before performing the fuel system services:
    • Fuel vapor is hazardous. It can easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel.
    • Fuel line spills and leakage are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin and eyes. To prevent this, always complete "BEFORE REPAIR PROCEDURE" and "AFTER REPAIR PROCEDURE" described in this manual.

      (See BEFORE REPAIR PROCEDURE .)

      (See AFTER REPAIR PROCEDURE .)

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.