SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2008TRIBUTE S SPORT, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 343 (SYMPTOM TROUBLESHOOTING (ENGINE CONTROL SYSTEM L3))NO. 27 FUEL REFILL CONCERNSNOTES
2008 Mazda Tribute s Sport, 4WD

No. 27 Fuel Refill Concerns: Notes

2008 Mazda Tribute s Sport, 4WDSECTION Notes
WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
DESCRIPTION & POSSIBLE CAUSE

27 Fuel refill concerns
DESCRIPTION 
  • Fuel tank does not fill smoothly.
POSSIBLE CAUSE 
  • Clogged EVAP pipes
  • Nonreturn valve malfunction
  • Improper use of fuel nozzle
  • Inadequate fuel filling speed
    WARNING:
    • The following troubleshooting flow chart contains the fuel system diagnosis and repair procedures. Read the following warnings before servicing the fuel system:
      • Fuel vapor is hazardous. It can easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel.
      • Fuel line spills and leakage are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin and eyes. To prevent this, always complete "BEFORE REPAIR PROCEDURE" and "AFTER REPAIR PROCEDURE" described in the repair information.

        (See BEFORE REPAIR PROCEDURE .)

        (See AFTER REPAIR PROCEDURE .)

    RENDER: 1.0x

    NO RELATED

    Recommended Tools & Savings

    Use the Manual With the Right Hardware

    Pair factory procedures with proven DIY tools so the instructions are easier to execute.

    Affiliate disclosure: We may earn a commission at no extra cost to you.

    Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

    When to See a Mechanic

    Stop DIY work and contact a certified mechanic immediately if any of the following apply:

    • • You smell fuel, burning insulation, or see smoke.
    • • Brakes feel soft, pull hard to one side, or make grinding noises.
    • • The engine overheats, stalls repeatedly, or misfires under load.
    • • You are missing required tools, torque specs, or safe lifting equipment.
    • • You are not confident in the next step or safety outcome.