Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2008TRIBUTE S SPORT, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 268 (ENGINE - INTAKE-AIR SYSTEMS)ACCELERATOR CABLE ADJUSTMENT
2008 Mazda Tribute s Sport, 4WD
Accelerator Cable Adjustment
2008 Mazda Tribute s Sport, 4WDSECTION Accelerator Cable Adjustment
WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Move the white locking tab A to the unlock position.
- If stopper B will not unlock, it may be necessary to carefully bend tab C out using a suitable tool.
- Turn stopper B to the unlock position.
- To adjust the free play, push or pull the throttle cable housing directly behind the spring.
- Measure the throttle cable free play, making sure that it is within the specification.
Free Play
- 1.5-4.0 mm {0.06-0.15 in}
- Turn stopper B to lock position.
- Move the white locking tab A to the lock position.
- Verify correct accelerator operation.
NOTE:
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.