Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2008TRIBUTE S SPORT, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 241 (HVAC SYSTEM)AIRCONDITIONING SPECIFICATIONSMANUAL SYSTEMTORQUE SPECIFICATIONS
2008 Mazda Tribute s Sport, 4WD
Torque Specifications
2008 Mazda Tribute s Sport, 4WDSECTION Torque Specifications
WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
A/C SYSTEM TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| A/C Compressor Fitting Bolts | 11.6-16.6 (15.7-22.6) | ||
| A/C Compressor Mounting Bolts | 11.6-16.6 (15.7-22.6) | ||
| Dashboard Mounting Bolts (Bolt "A") (1) | 13.2-18.8 (18.6-25.5) | ||
| Power Steering Oil Pump Mounting Bolt | 14-18 (18.6-25.5) | ||
| Power Steering Pressure Pipe Mounting Bolts | 22-32 (29.4-44.1) | ||
| Power Steering Oil Pump Bracket Mounting Bolt (3.0L) | 14-18 (18.6-25.5) | ||
| Steering Wheel Nut | 30-36 (39.2-497) | ||
| INCH Lbs. (N.m) | |||
| Dashboard Mounting Bolts (Bolt "B") (1) | 19-26 (2.1-2.9) | ||
| Drivers Side Air Bag Module Mounting Bolt | 79-112 (8.9-12.7) | ||
| Passenger Side Air Bag Module Mounting Bolt | 70-104 (7.9-11.7) | ||
| Steering Wheel Column Bolts | 79-112 (8.9-12.7) | ||
|
|||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.