Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Material Specifications
2008 Mazda Tribute s Sport, 4WDSECTION Material Specifications
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS TABLE
| Item | Specification |
|---|---|
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1-C (US); CPM-1-C (Canada) |
WSS-M6C62-A or WSS-M6C65-A1 |
ITEM DESCRIPTION
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Master cylinder primary brake tube fitting (part of 2C360) |
| 2 | - | RH front brake tube fitting (part of 2263) |
| 3 | - | LH front brake tube fitting (part of 2C360) |
| 4 | - | Master cylinder secondary brake tube fitting (part of 2C360) |
| 5 | - | RH rear brake tube fitting (part of 9J279) |
| 6 | - | LH rear brake tube fitting (part of 9J279) |
| 7 | - | ABS module electrical connector (part of 14290) |
| 8 | W505433 | Hydraulic Control Unit (HCU) bracket-to-frame bolts |
| 9 | 2C065 | HCU |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.