Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2008TRIBUTE S SPORT, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2151 (SUPPLEMENTAL RESTRAINT SYSTEM)SPECIFICATIONSTORQUE SPECIFICATIONS
2008 Mazda Tribute s Sport, 4WD
Torque Specifications
2008 Mazda Tribute s Sport, 4WDSECTION Torque Specifications
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS TABLES
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Front impact severity sensor bolts | 12 | - | 106 |
| Knee air bag module bolts - driver (Hybrid) | 9 | - | 80 |
| Occupant Classification System (OCS) weight sensor assembly bolts | 25 | 18 | - |
| Passenger air bag module-to-deployment chute bolts | 9 | - | 80 |
| Passenger air bag module bolts (to cross-car beam bracket) | 9 | - | 80 |
| Passenger air bag module deployment chute nuts | 10 | - | 89 |
| Restraints Control Module (RCM) bolts | 12 | - | 106 |
| Seat position sensor bolt | 6 | - | 53 |
| Seat risers-to-OCS weight sensor assembly bolts | 25 | 18 | - |
| Seat track-to-floor bolts | 47 | 35 | - |
| Side air bag module nuts | 8 | - | 71 |
| Side air curtain module bolts | 8 | - | 71 |
| Side impact sensor (front door) bolt | 2 | - | 18 |
| Side impact sensor (C-pillar) bolt | 12 | - | 106 |
| Steering column opening cover reinforcement | 3 | - | 27 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.