Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2008TRIBUTE S SPORT, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 204 (AUTOMATIC TRANSAXLE (SERVICE))O/D OFF INDICATOR LIGHT INSPECTIONINSPECTION OF OPERATION
2008 Mazda Tribute s Sport, 4WD
Inspection Of Operation
2008 Mazda Tribute s Sport, 4WDSECTION Inspection Of Operation
WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch from OFF to ON position.
- The O/D OFF indicator light will illuminate if a malfunction exists in any of the EC-AT system components.
- Verify that the O/D OFF indicator light is not illuminated.
- Press the switch and verify that the O/D OFF indicator illuminates.
- If the O/D OFF switch function is not as specified, after checking the O/D OFF switch (See O/D OFF SWITCH INSPECTION .), inspect the terminal voltage of the O/D OFF indicator light.
NOTE:
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.