Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Principles of Operation
The compass and ambient air temperature display can be turned on and off by pressing the SELECT switch in the overhead console. The vehicle heading is displayed as N, NE, E, SE, S, SW, W, or NW.
The ambient air temperature can be displayed in Celsius or Fahrenheit by pressing the SELECT switch.
If the ambient air temperature falls below 3.3°C (38°F), the ambient air temperature display alternates at a 2-second rate from "ICE" to the ambient air temperature for one minute after starting the vehicle. After one minute has elapsed, the ambient air temperature display will show only the temperature reading.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.