Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Parameter Identification (PID) Access
The PID mode allows access to certain data values, analog and digital inputs and outputs, calculated values and system status information. This includes analog and digital signal inputs and outputs along with calculated values and system status. There are two types of PID lists available. The first is the Generic OBD II PID list. This is a standard set of PIDs for all manufacturers which all scan tools musts be able to access. The second is a Mazda specific list which can be accessed by the IDS or equivalent tester. When accessing any of these PIDs, the values will be continuously updated. For a complete list of all PIDs.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.