Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSMAZDA2008TRIBUTE S SPORT, 4WDREPAIR AND DIAGNOSISENGINE PERFORMANCEFUEL DELIVERYFUEL SYSTEM - EXCEPT HYBRIDSPRING LOCK COUPLINGSDISCONNECT

2008 Mazda Tribute s Sport, 4WD

Spring Lock Couplings: Disconnect

2008 Mazda Tribute s Sport, 4WDSECTION Disconnect

Release the fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE .
Remove the safety clip from the spring lock coupling.

Fig 1: Removing Safety Clip From Spring Lock Coupling
Courtesy of MAZDA MOTORS CORP.
Insert the special tool onto the fuel tube and into the spring lock coupling.

Fig 2: Inserting Special Tool Onto Fuel Tube And Into Spring Lock Coupling
Courtesy of MAZDA MOTORS CORP.
Separate the spring lock coupling from the fuel tube.

Fig 3: Separating Spring Lock Coupling From Fuel Tube
Courtesy of MAZDA MOTORS CORP.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.