Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Normal Operation
The smart junction box (SJB) activates the accessory delay relay by grounding the coil side of the relay. The accessory delay relay then provides voltage to the SJB circuit breaker 47 (30A), which in turn provides voltage to circuit (G/L) for the window control switches. The master window adjust switch is grounded through circuit (B/GY).
Possible Causes
- Circuit breaker
- Wiring, terminals or connectors
- Accessory delay relay
- Master window adjust switch
- SJB
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.