Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSMAZDA2008CX-7 TOURING, 2.3 3, AWDREPAIR AND DIAGNOSISELECTRICALCHARGING SYSTEMSCHARGING SYSTEMGENERATOR INSPECTION[L3 WITH TC]GENERATOR INNER PARTSSTATOR COIL

2008 Mazda CX-7 Touring, 2.3 3, AWD

Stator coil

2008 Mazda CX-7 Touring, 2.3 3, AWDSECTION Stator coil

Verify that the continuity is as indicated in the table.

Fig 1: Identifying Stator Coil Connector Terminals
Courtesy of MAZDA MOTORS CORP.
- If there is any malfunction, replace the stator.
  
  Fig 2: Continuity Chart
  Courtesy of MAZDA MOTORS CORP.
Verify that there is no continuity between the stator coil leads and core using a tester.
- If there is continuity, replace the stator coil.
  
  Fig 3: Measuring Continuity Between Stator Coil Leads And Core Using Tester
  Courtesy of MAZDA MOTORS CORP.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.