Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2008CX-7 TOURING, 2.3 3, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEEXTERIOR/INTERIOR TRIMINTERIOR TRIMB-PILLAR LOWER TRIM REMOVAL/INSTALLATION
2008 Mazda CX-7 Touring, 2.3 3, AWD
B-Pillar Lower Trim Removal/Installation
2008 Mazda CX-7 Touring, 2.3 3, AWDSECTION B-Pillar Lower Trim Removal/Installation
- Remove the front scuff plate inner. (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
- Remove the rear scuff plate inner. (See REAR SCUFF PLATE REMOVAL/INSTALLATION .)
- Partially peel back the seaming welt.
- Pull the B-pillar lower trim outward and detach clips A, C and locator pins B.
- Remove the B-pillar lower trim.
- Install in the reverse order of removal.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.