Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA20086 S SPORT, 4D HATCHBACK, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 85 (AIR BAG SYSTEM)REMOVAL & INSTALLATIONSIDE AIR BAG MODULEINSTALLATION
2008 Mazda 6 s Sport, 4D Hatchback, Standard
Side Air Bag Module: Installation
2008 Mazda 6 s Sport, 4D Hatchback, StandardSECTION Installation
WARNING: This page is about a different car, the 2003 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Personal injury is possible. Foreign objects between side air bag module and seat components may be projected toward occupants during air bag deployment. Ensure side air bag module, air bag mounting surfaces, deployment chute and seat back pad are free of foreign objects.
Improper air bag deployment is possible. If air bag cover has separated or air bag material has been exposed, air bag may deploy improperly, resulting in personal injury. If air bag cover has separated or air bag material has been exposed, install new air bag module. Do not attempt to repair air bag module.
Improper air bag deployment is possible. If air bag cover has separated or air bag material has been exposed, air bag may deploy improperly, resulting in personal injury. If air bag cover has separated or air bag material has been exposed, install new air bag module. Do not attempt to repair air bag module.
- To install, reverse removal procedure. If installing NEW air bag module, use NEW mounting nuts. If installing same air bag module, original nuts may be reused. Tighten nuts and bolts to specification. See TORQUE SPECIFICATIONS .
- Connect negative battery cable. With air bag simulators installed at all remaining deployable devices, verify air bag system. See VERIFY SYSTEM under DIAGNOSTICS. Disconnect negative battery cable. Wait at least one minute for back-up power supply to deplete stored energy. Activate air bag system. See ACTIVATING SYSTEM under DISABLING & ACTIVATING AIR BAG SYSTEM. Check AIR BAG warning light for proper system function. See SYSTEM OPERATION CHECK .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.