SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA20086 S SPORT, 4D HATCHBACK, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 624 (SYMPTOM TROUBLESHOOTING [ENGINE))NO.27 FUEL REFILL CONCERNSNOTES
2008 Mazda 6 s Sport, 4D Hatchback, Standard

No.27 Fuel Refill Concerns: Notes

2008 Mazda 6 s Sport, 4D Hatchback, StandardSECTION Notes
WARNING: This page is about a different car, the 2008 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
FUEL REFILL CONCERNS DESCRIPTION & POSSIBLE CAUSE TABLE

27 Fuel refill concerns
DESCRIPTION 
  • The fuel tank does not fill smoothly.
POSSIBLE CAUSE 
  • Clogged EVAP pipes
  • Nonreturn valve malfunction
  • Improper use of fuel nozzle
  • Inadequate fuel filling speed
WARNING: The following troubleshooting flow chart contains fuel system diagnosis and repair procedures. Read the following warnings before servicing the fuel system: 
  • Fuel vapor is hazardous. It can easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel. 
  • Fuel line spills and leakage are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin and eyes. To prevent this, always complete "BEFORE REPAIR PROCEDURE" and "AFTER REPAIR PROCEDURE". 

    (See  BEFORE REPAIR PROCEDURE  ) 

    (See  AFTER REPAIR PROCEDURE  ) 

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.