Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA20086 S SPORT, 4D HATCHBACK, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 469 (CONTROL SYSTEM (HVAC))EVAPORATOR TEMPERATURE SENSOR INSPECTION
2008 Mazda 6 s Sport, 4D Hatchback, Standard
Evaporator Temperature Sensor Inspection
2008 Mazda 6 s Sport, 4D Hatchback, StandardSECTION Evaporator Temperature Sensor Inspection
WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Inspect the evaporator temperature sensor when it is installed to the A/C unit.
- Set the fan switch to 4th speed.
- Set the temperature control to MAX COLD.
- Set the air intake mode to RECIRCULATE.
- Turn the A/C switch off.
- Close all of the doors and roll up all the windows.
- Wait for 5 min.
- Disconnect the evaporator temperature sensor connector.
- Measure the temperature at the air intake.
- Measure the resistance between evaporator temperature sensor terminals.
- If the characteristics of the evaporator temperature sensor are not as shown in the graph, replace the evaporator temperature sensor.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.