Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA20086 S SPORT, 4D HATCHBACK, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 387 (INSTRUMENTATION/DRIVER INFO)INSTRUMENT CLUSTER INPUT/OUTPUT CHECK MODEINSPECTION OF CHECK CODESCHECK CODE 08DIAGNOSTIC PROCEDURE
2008 Mazda 6 s Sport, 4D Hatchback, Standard
Diagnostic procedure
2008 Mazda 6 s Sport, 4D Hatchback, StandardSECTION Diagnostic procedure
WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
CHECK CODE 08 DIAGNOSTIC PROCEDURE
| STEP | INSPECTION | INDICATION | ACTION |
|---|---|---|---|
| 1 | Turn headlight switch to TNS position. (TNS relay on.) | on | Go to next step. |
| off | Measure voltage at instrument cluster terminal 2K. Is voltage B+ ?
|
||
| 2 | Turn headlight switch off. (TNS relay off.) | on | Measure voltage at instrument cluster terminal 2K. Is voltage 0 V ?
|
| off | Input signal to instrument cluster is okay. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.