SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA20086 S SPORT, 4D HATCHBACK, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 382 (INTERIOR TRIM)DASHBOARD DISASSEMBLY/ASSEMBLY
2008 Mazda 6 s Sport, 4D Hatchback, Standard

Dashboard Disassembly/Assembly

2008 Mazda 6 s Sport, 4D Hatchback, StandardSECTION Dashboard Disassembly/Assembly
WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the passenger-side air bag module.
  2. Remove the ventilator grilles.
  3. Remove the audio unit.
  4. Remove the climate control unit.
  5. Disassemble in the order indicated in the table.
    Fig 1: Dashboard Disassembly Sequence
    G03645491Courtesy of MAZDA MOTORS CORP.
  6. Assemble in the reverse order of disassembly.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.