Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA20086 S SPORT, 4D HATCHBACK, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 333 (SYMPTOM TROUBLESHOOTING (ENGINE CONTROL SYSTEM AJ))ENGINE CONTROL SYSTEM OPERATION INSPECTIONA/C CUT-OFF CONTROL SYSTEM INSPECTION
2008 Mazda 6 s Sport, 4D Hatchback, Standard
A/C Cut-off Control System Inspection
2008 Mazda 6 s Sport, 4D Hatchback, StandardSECTION A/C Cut-off Control System Inspection
WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Start the engine.
- Turn the A/C switch and fan switch on.
- Verify that the A/C compressor magnetic clutch actuates.
- If it does not actuate, go to symptom troubleshooting "NO. 23 A/C DOES NOT WORK SUFFICIENTLY ".
- Fully open the throttle valve and verify that the A/C compressor magnetic clutch does not actuate for 2-5 s.
- If it actuates, inspect the following:
- A/C relay
- Open or short to GND circuit in wiring harness and connectors (Ignition switch- A/C relay-PCM terminal 47)
- A/C related parts
- APP1, APP2 PIDs
- If it actuates, inspect the following:
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.