Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA20086 S SPORT, 4D HATCHBACK, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 32 (SPECIFICATIONS & DRIVE BELT ROUTING)SPECIFICATIONSCOOLING SYSTEM SPECIFICATIONS
2008 Mazda 6 s Sport, 4D Hatchback, Standard
Cooling System Specifications
2008 Mazda 6 s Sport, 4D Hatchback, StandardSECTION Cooling System Specifications
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Mazda Tribute, 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, and 2002 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
COOLING SYSTEM SPECIFICATIONS
| Application | Specification | |||||
|---|---|---|---|---|---|---|
| B2300 | ||||||
| Coolant Replacement Interval | (1) 45,000 Miles Or 36 Months | |||||
| Coolant Capacity | ||||||
| A/T | 10.9 Qts. (10.3L) | |||||
| M/T | 11.2 Qts. (10.6L) | |||||
| Pressure Cap | 13-18 psi | |||||
| Thermostat Opens | ||||||
| Starts | 183-190°F (84-88°C) | |||||
| Fully Open | 210°F (99°C) | |||||
| B3000 | ||||||
| Coolant Replacement Interval | (1) 45,000 Miles Or 36 Months | |||||
| Coolant Capacity | ||||||
| A/T | 14.9 Qts. (14.1L) | |||||
| M/T | 15.2 Qts. (14.4L) | |||||
| Pressure Cap | 13-18 psi | |||||
| Thermostat Opens | ||||||
| Starts | 183-190°F (84-88°C) | |||||
| Fully Open | 210°F (99°C) | |||||
| B4000 | ||||||
| Coolant Replacement Interval | (1) 45,000 Miles Or 36 Months | |||||
| Coolant Capacity | ||||||
| A/T | 13.2 Qts. (12.5L) | |||||
| M/T | 13.5 Qts. (12.8) | |||||
| Pressure Cap | 13-18 psi | |||||
| Thermostat Opens | ||||||
| Starts | 183-190°F (84-88°C) | |||||
| Fully Open | 210°F (99°C) | |||||
| MX-5 Miata | ||||||
| Coolant Replacement Interval | (1) 45,000 Miles Or 36 Months | |||||
| Coolant Capacity | 6.3 Qts. (6.0L) | |||||
| Pressure Cap | 13.6-17.7 psi | |||||
| Thermostat Opens | ||||||
| Starts | 183-190°F (84-88°C) | |||||
| Fully Open | 176°F (80°C) | |||||
| Millenia | ||||||
| Coolant Replacement Interval | (1) 45,000 Miles Or 36 Months | |||||
| Coolant Capacity | 7.9 Qts. (7.5L) | |||||
| Pressure Cap | 13.6-17.7 psi | |||||
| Thermostat Opens | ||||||
| Starts | 176-183°F (80-84°C) | |||||
| Fully Open | 203°F (95°C) | |||||
| MPV | ||||||
| Coolant Replacement Interval | (1) 45,000 Miles Or 36 Months | |||||
| Coolant Capacity | ||||||
| With Rear Heater | 13.1 (12.4) | |||||
| Without Rear Heater | 11.2 (10.6) | |||||
| Pressure Cap | 13.6.-17.7 psi | |||||
| Thermostat Opens | ||||||
| Starts | 185-190°F (85-88°C) | |||||
| Fully Open | 210°F (99°C) | |||||
| Protege | ||||||
| Coolant Replacement Interval | (1) 45,000 Miles Or 36 Months | |||||
| Coolant Capacity | ||||||
| 1.6L | 6.4 Qts. (6.0L) | |||||
| 2.0L | 8.0 Qts. (7.5L) | |||||
| Pressure Cap | 13.6-17.7 psi | |||||
| Thermostat Opens | ||||||
| 1.6L | ||||||
| Starts | 183-190°F (84-90°C) | |||||
| Fully Open | 212°F (100°C) | |||||
| 2.0L | ||||||
| Starts | 176-183°F (80-84°C) | |||||
| Fully Open | 203°F (95°C) | |||||
| Tribute | ||||||
| Coolant Replacement Interval | (1) 45,000 Miles Or 36 Months | |||||
| Coolant Capacity | ||||||
| 2.0L | 7.2 Qts. (6.6L) | |||||
| 3.0L | 10.5 Qts. (10.0L) | |||||
| Pressure Cap | 14-19 psi | |||||
| Thermostat Opens | ||||||
| 2.0L | ||||||
| Starts | 194-201°F (90-94°C) | |||||
| Fully Open | 223°F (106°C) | |||||
| 3.0L | ||||||
| Starts | 194-200°F (90-93°C) | |||||
| Fully Open | 223°F (106°C) | |||||
| 626 | ||||||
| Coolant Replacement Interval | (1) 105,000 Miles Or 60 Months | |||||
| Coolant Capacity | 7.9 Qts. (7.5L) | |||||
| Pressure Cap | 13.6-17.7 psi | |||||
| Thermostat Opens | ||||||
| Starts | 176-183°F (80-84°C) | |||||
| Fully Open | 203°F (95°C) | |||||
|
||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.