Anti-Lock Brake/Traction Control System DTCS

2008 Mazda 6 s Sport, 4D Hatchback, StandardSECTION Anti-Lock Brake/Traction Control System DTCS
ANTI-LOCK BRAKE/TRACTION CONTROL SYSTEM DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Diagnosis system component
B1318 ABS/TCS power supply
B1342 ABS/TCS HU/CM
B2477 Module configuration
C1095 Motor relay, pump motor
C1096 Motor relay, pump motor
C1119 Engine control system, torque reduction inhibit signal line
C1140 ABS/TCS HU/CM (pump)
C1145 Right front ABS wheel-speed sensor
C1148 Right front ABS wheel-speed sensor/sensor rotor
C1155 Left front ABS wheel-speed sensor
C1158 Left front ABS wheel-speed sensor/sensor rotor
C1165 Right rear ABS wheel-speed sensor
C1168 Right rear ABS wheel-speed sensor/sensor rotor
C1175 Left rear ABS wheel-speed sensor
C1178 Left rear ABS wheel-speed sensor/sensor rotor
C1186 Fail-safe relay
C1194 Left front pressure reduction solenoid valve
C1198 Left front pressure retention solenoid valve
C1210 Right front pressure reduction solenoid valve
C1214 Right front pressure retention solenoid valve
C1233 Left front ABS wheel-speed sensor/sensor rotor
C1234 Right front ABS wheel-speed sensor/sensor rotor
C1235 Right rear ABS wheel-speed sensor/sensor rotor
C1236 Left rear ABS wheel-speed sensor/sensor rotor
C1242 Left rear pressure reduction solenoid valve
C1246 Right rear pressure reduction solenoid valve
C1250 Left rear pressure retention solenoid valve
C1254 Right rear pressure retention solenoid valve
C1266 Fail-safe relay
C1414 ABS/TCS HU/CM
C1508 TCS control
C1510 Right front solenoid valve, motor or ABS wheel-speed sensor/sensor rotor
C1511 Left front solenoid valve, motor or ABS wheel-speed sensor/sensor rotor
C1512 Right rear solenoid valve, motor or ABS wheel-speed sensor/sensor rotor
C1513 Left rear solenoid valve, motor or ABS wheel-speed sensor/sensor rotor
U0073 CAN system communication error
U0100 Communication error to PCM
U0101 Communication error to TCM
U0155 Communication error to instrument cluster
U2021 Engine coolant temperature
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.