Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA20086 S SPORT, 4D HATCHBACK, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALHORNSINSTRUMENTATION/DRIVER INFOINSTRUMENT CLUSTER INPUT/OUTPUT CHECK MODEINSPECTION OF CHECK CODESCHECK CODE 04
2008 Mazda 6 s Sport, 4D Hatchback, Standard
Check code 04
2008 Mazda 6 s Sport, 4D Hatchback, StandardSECTION Check code 04
CHECK CODE 04 REFERENCE (DOOR SWITCH)
| Check code 04 | Door switch on/off signal |
|---|---|
CHECK CODE 04 DIAGNOSTIC PROCEDURE
| STEP | INSPECTION | INDICATION | ACTION |
|---|---|---|---|
| 1 | Open driver-side door. (Door switch on). | Close driver-side door, then go to next step. | |
Measure voltage at instrument cluster terminal 1 J. Is voltage 0 V?
|
|||
| 2 | Close driver-side door. (Door switch off). | Measure voltage at instrument cluster terminals 1J. Is voltage B+
?
|
|
| Input signal to instrument cluster is okay. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.