Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Mazda B2300 L4-2.3LFACTORY OEM SERVICE PROCEDURE
System Specifications
Timing Cover
Tighten the bolts in the sequence shown, to the following specifications:
Tighten the 8 mm bolts 10 Nm (11 kgf-m, 7 ft. lbs.)
Tighten the 10 mm bolts 25 Nm (2.5 kgf-m, 18 ft. lbs.)
Tighten the 13 mm bolts 48 Nm (4.889 kgf-m, 35 ft. lbs.)
Tighten the bolts in the sequence shown, to the following specifications:
Tighten the 8 mm bolts 10 Nm (11 kgf-m, 7 ft. lbs.)
Tighten the 10 mm bolts 25 Nm (2.5 kgf-m, 18 ft. lbs.)
Tighten the 13 mm bolts 48 Nm (4.889 kgf-m, 35 ft. lbs.)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.