Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSMAZDA2006B4000 BASE, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCETUNE-UPTECHNICAL DATA [ENGINE MECHANICAL)ENGINE IGNITION SPECIFICATIONS - 3.0L

2006 Mazda B4000 Base, Automatic

Engine Ignition Specifications - 3.0L

2006 Mazda B4000 Base, AutomaticSECTION Engine Ignition Specifications - 3.0L

Fig 1: Identifying 3.0L Firing Order

Courtesy of MAZDA MOTORS CORP.

ENGINE IGNITION SPECIFICATIONS -3.0L

Item	Specification
Base Timing	10 degrees BTDC
Firing Order	1-4-2-5-3-6
Left Side Original Spark Plug	AWSF32P
Right Side Original Spark Plug	AWSF32PG
Replacement Spark Plug	AWSF32PP (both sides)
Spark Plug Gap	1.07-1.17 mm (0.042-0.046 in)

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.