Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine Oil Leaks - Fluorescent Oil Additive Method
2006 Mazda B4000 Base, AutomaticSECTION Engine Oil Leaks - Fluorescent Oil Additive Method
NOTE:
- When diagnosing engine oil leaks, the source and location of the leak must be positively identified prior to service.
- Clean the engine with a suitable solvent to remove all traces of oil.
- Drain the engine oil crankcase and refill with recommended oil, premixed with engine oil dye. Use a minimum 14.8 ml (0.5 ounce) to a maximum 29.6 ml (1 ounce) of fluorescent additive to all engines. If the oil is not premixed, the fluorescent additive must be added to the crankcase before the oil.
- Run the engine for 15 minutes. Stop the engine and inspect all seal and gasket areas for leaks. A clear bright yellow or orange area will identify a leak. For extremely small leaks, several hours may be required for the leak to appear.
- Inspect oil gallery plugs to locate leaks due to improperly sealed, loose or cocked plugs. If oil leaks appear from the flywheel attaching bolts, apply sealant to the threads and tighten to 73-87 N.m {7.5-8.8 kgf.m, 54-64 ft.lbf}.
- Repair all leaks as required.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.