Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2006B2300 L4-2.3L VIN DREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSCLUTCH, M/TSYSTEM SPECIFICATIONS
2006 Mazda B2300 L4-2.3L VIN D
System Specifications
2006 Mazda B2300 L4-2.3L VIN DSECTION System Specifications
Clutch Specifications (2.31L and 3.01L)
Description Specification
Clutch diameter (approx.)l 9°
Disc type2 Segmented
Lining material Woven
Outside diameter (approx.) 9°
Inside dia. 5.9
Facing area (")2 68.4
Facing thickness 0.138
Pressure plate Type belleville
Total plate pressure (lb.) 1,331
Release bearing Lubed for life: self centering full angular contact
Clutch Specifications (4.01L)
Description Specification
Clutch diameter (approx.)l 10°
Disc type2 Segmented
Lining material Woven
Outside diameter (approx.) 10°
Inside dia. 7.25
Facing area (*) 67.2
Facing thickness 0.138
Pressure plate Type belleville
Total plate pressure (lb.) 1,517
Release bearing Lubed for life: self centering full angular contact
Clutch Control Hydraulic
Clutch Pedal Type Suspended
Clutch Disc Lining Depth 0.3 mm (0.012 inch) minimum
Clutch Disc Runout 0.7 mm (0.0276 inch) maximum
Tension Spring Adjustment 14.0 mm (0.55 inch) maximum
System Adjustment Clutch Automatic
Clutch Fluid SAE J1703, FMUSS116 DOT-3
Description Specification
Clutch diameter (approx.)l 9°
Disc type2 Segmented
Lining material Woven
Outside diameter (approx.) 9°
Inside dia. 5.9
Facing area (")2 68.4
Facing thickness 0.138
Pressure plate Type belleville
Total plate pressure (lb.) 1,331
Release bearing Lubed for life: self centering full angular contact
Clutch Specifications (4.01L)
Description Specification
Clutch diameter (approx.)l 10°
Disc type2 Segmented
Lining material Woven
Outside diameter (approx.) 10°
Inside dia. 7.25
Facing area (*) 67.2
Facing thickness 0.138
Pressure plate Type belleville
Total plate pressure (lb.) 1,517
Release bearing Lubed for life: self centering full angular contact
Clutch Control Hydraulic
Clutch Pedal Type Suspended
Clutch Disc Lining Depth 0.3 mm (0.012 inch) minimum
Clutch Disc Runout 0.7 mm (0.0276 inch) maximum
Tension Spring Adjustment 14.0 mm (0.55 inch) maximum
System Adjustment Clutch Automatic
Clutch Fluid SAE J1703, FMUSS116 DOT-3
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.