Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA20066 I, 4D SEDAN, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSFLUIDS
2006 Mazda 6 i, 4D Sedan, Automatic
Quick Lookups: Fluids
2006 Mazda 6 i, 4D Sedan, AutomaticSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 5.00 OZS. | 0.14 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.10 LBS. | 0.49 KG | R-134a | S | |||
| Automatic Transmission Fluid | i,2.3L Eng | 8.50 QTS. | 8.04 L | Automatic Transmission Fluid M V | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | Fill to line on reservoir. | S | ||
| Engine Coolant | i,2.3L Eng | 7.40 QTS. | 7 L | FL22 type engine coolant concentration is factory adjusted. Use the product as it is without diluting it. Except FL22 type engine coolant: Above 3Deg.F use: 35% Antifreeze solution and 65% demineralized water, above -15Deg.F use: 45% Antifreeze solution and 55% demineralized water, above -40Deg.F use: 55% Antifreeze solution and 45% demineralized water. | S | ||
| Engine Oil | i,2.3L Eng | w/Filter | 4.50 QTS. | 4.25 L | API - ILSAC, SAE 5W-20 Engine Oil | S | |
| Engine Oil | i,2.3L Eng | w/o Filter | 4.10 QTS. | 3.88 L | API - ILSAC, SAE 5W-20 Engine Oil | S | |
| Fuel Tank | i,s | 18.00 GALS. | 68.13 L | S | |||
| Manual Transmission Fluid | i,2.3L Eng | 3.00 QTS. | 2.83 L | API - GL-4 or GL-5, SAE 75W-90 (Any temperature). API - GL-4 or GL-5, SAE 80W-90 (Temperature above 50Deg.F) | S | ||
| Power Steering Fluid | N/A | N/A | Automatic Transmission Fluid M III, M V or equivalent | S | |||
| Windshield Washer Fluid | N/A | N/A | Ultra-Clear Windshield Washer Fluid | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.