SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2005B2300 AUTOMATICREPAIR AND DIAGNOSISDRIVELINES & AXLESDIFFERENTIALS & DRIVE AXLESFRONT AXLEAXLE HOUSING BUSHING REMOVAL/INSTALLATIONINSTALLATION NOTE
2005 Mazda B2300 Automatic

Installation Note

2005 Mazda B2300 AutomaticSECTION Installation Note
NOTE:
  • Axle tube bushing installation shown, axle housing bushing is a similar procedure.
  1. Position the bushing and the tube bushing installation or equivalent tools.
    1. Position the bushing.
    2. Position Gauge Ring SST  204-206 (T96T-5638-D).
    3. Position Bushing Replacer Collet SST  205-372 (T96T-5638-F).
    4. Position Bushing Remover/Replacer Cup SST  205-371 (T96T-538-E).
    5. Position Drawbolt SST  205-374 (T96T-5638-H).
    6. Thread Bushing Replacer Adapter SST  205-370 (T96T-5638-B) on the Drawbolt SST.
      Fig 1: Positioning Bushing And Tube Bushing Installation Tools
      G03729615Courtesy of MAZDA MOTORS CORP.
  2. Tighten the Drawbolt SST  to install the bushing.
    1. Remove the tools.
  3. Install the front axle assembly. See AXLE ASSEMBLY FRONT REMOVAL/INSTALLATION .
  4. Check the fluid level and fill the axle to specification.
    • Use axle lubricant meeting specification API Service GI-5
  5. Lower the vehicle.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.