Engine Controls - Service & Adjustment Specifications: Capacities

1999 Mazda Protege ES, AutomaticSECTION Capacities
BATTERY SPECIFICATIONS

Application Amp Hr. Rating
B2500, B3000 & B4000 57
Miata 32
Millenia
2.3L 55
2.5L 52
Protege
Standard 40
Optional (1.8L only) 52
626 48
FLUID CAPACITIES

Application Quantity Qts. (L)
Crankcase (Includes Filter)
B2500, B3000 & B4000
2.5L & 3.0L 4.5 (4.3)
4.0L 5.0 (4.7)
Miata 4.0 (3.8)
Millenia
2.3L 4.3 (4.1)
2.5L 4.2 (4.0)
Protege
1.6L 3.4 (3.2)
1.8L 3.7 (3.5)
626
2.0L 3.7 (3.5)
2.5L 4.2 (4.0)
Cooling System (Includes Heater)
B2500, B3000 & B4000
2.5L
Manual 10.5 (10.0)
Automatic 10.2 (9.7)
3.0L
Manual 15.2 (14.4)
Automatic 14.8 (14.1)
4.0L
Manual 13.5 (12.8)
Automatic 13.2 (12.5)
Miata 6.3 (6.0)
Millenia 7.9 (7.5)
Protege
1.6L 6.3 (6.0)
1.8L 7.9 (7.5)
626 7.9 (7.5)
Manual Transaxle
Protege 2.9 (2.7)
626 2.9 (2.7)
Manual Transmission
B2500, B3000 & B4000 (3) 2.9 (2.7)
Miata (1) 2.1 (2.0)
Automatic Transaxle
Millenia (2)
2.3L 8.5 (8.0)
2.5L 7.8 (7.4)
Protege (2) 7.6 (7.2)
626
2.0L (3) 8.8 (8.3)
2.5L (2) 8.5 (8.0)
Automatic Transmission
B2500, B3000 & B4000 (4)
4x2
2.5L 9.8 (9.0)
3.0L & 4.0L 10.0 (9.5)
4x4 10.3 (9.8)
Miata (2) 6.8 (6.4)
Front Differential (5)
B3000 & 4000 1.5-1.8 (1.4-1.7)
Rear Differential (5)(6)
B2500, B3000 & B4000 2.5-2.7 (2.4-2.6)
Miata 1.1 (1.0)
Transfer Case
B3000 & B4000 (2) 1.3 (1.2)
(1) Use SAE 75W-90 for all-season conditions, and SAE 80W-90 for temperatures greater than 50°F (10°C)
(2) Use M-III or Dexron-II ATF.
(3) Use ATF M-III or MERCON ATF.
(4) Use MERCON V ATF
(5) Use SAE 90 for temperatures greater than 0°F (-18°C), and SAE 80W for temperatures less than 0°F (-18°C).
(6) With 4 oz. of appropriate friction modifier added.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.